Paper
1 June 2015 Electrospray ionization deposition of BSA under vacuum conditions
Dominic Hecker, Daniel Gloess, Peter Frach, Gerald Gerlach
Author Affiliations +
Abstract
Vacuum deposition techniques like thermal evaporation and CVD with their precise layer control and high layer purity often cannot be applied for the deposition of chemical or biological molecules. The molecules are usually decomposed by heat. To overcome this problem, the Electrospray ionization (ESI) process known from mass spectroscopy is employed to transfer molecules into vacuum and to deposit them on a substrate. In this work, a homemade ESI tool was used to deposit BSA (Bovine serum albumin) layers with high deposition rates. Solutions with different concentrations of BSA were prepared using a methanol:water (MeOH:H2O) mixture (1:1) as solvent. The influence of the substrate distance on the deposition rate and on the transmission current was analyzed. Furthermore, the layer thickness distribution and layer adhesion were investigated.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dominic Hecker, Daniel Gloess, Peter Frach, and Gerald Gerlach "Electrospray ionization deposition of BSA under vacuum conditions", Proc. SPIE 9517, Smart Sensors, Actuators, and MEMS VII; and Cyber Physical Systems, 951729 (1 June 2015); https://doi.org/10.1117/12.2184807
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Capillaries

Molecules

Ionization

Vacuum deposition

Silicon

Scanning electron microscopy

Coating

RELATED CONTENT


Back to Top