Paper
19 April 2016 Laser controlled deposition of metal microstructures via nondiffracting Bessel beam illumination
Author Affiliations +
Abstract
The technique of the laser controlled deposition of sodium and rubidium deposits on the sapphire substrate is presented. The metals were deposited on the clean sapphire substrate from the vapor phase contained in the evacuated and sealed cell. We use an axicon to produce a non-diffracting Bessel beam out of the beam got from the cw diode laser with 200 mW power at the wavelength of 532 nm. After 30 minutes of the laser-controlled deposition the substrates were examined in the optical microscope. The obtained metal deposits form the sharp-cut circles with the pitch of 10 μm, coincident with the tens of dark rings of the Bessel beam. Reduction of the laser power leads to the build up of the continuous metal film over the whole substrate.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rafael Drampyan, Nikita Leonov, and Tigran Vartanyan "Laser controlled deposition of metal microstructures via nondiffracting Bessel beam illumination", Proc. SPIE 9884, Nanophotonics VI, 98841J (19 April 2016); https://doi.org/10.1117/12.2227763
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Chemical species

Sodium

Sapphire

Bessel beams

Nanoparticles

Nanostructures

Back to Top