Demonstration of digital hologram recording and 3D-scenes reconstruction in real-time

Pavel A. Cheremkhin; Nikolay N. Evtikhiev; Vitaly V. Krasnov; Mikhail N. Kulakov; Ekaterina A. Kurbatova; Dmitriy Yu. Molodtsov; Vladislav G. Rodin

doi:10.1117/12.2227767

27 April 2016 Demonstration of digital hologram recording and 3D-scenes reconstruction in real-time

Pavel A. Cheremkhin, Nikolay N. Evtikhiev, Vitaly V. Krasnov, Mikhail N. Kulakov, Ekaterina A. Kurbatova, Dmitriy Yu. Molodtsov, Vladislav G. Rodin

Author Affiliations +

Proceedings Volume 9889, Optical Modelling and Design IV; 98891M (2016) https://doi.org/10.1117/12.2227767
Event: SPIE Photonics Europe, 2016, Brussels, Belgium

Abstract

Digital holography is technique that allows to reconstruct information about 2D-objects and 3D-scenes. This is achieved by registration of interference pattern formed by two beams: object and reference ones. Pattern registered by the digital camera is processed. This allows to obtain amplitude and phase of the object beam. Reconstruction of shape of the 2D objects and 3D-scenes can be obtained numerically (using computer) and optically (using spatial light modulators - SLMs). In this work camera Megaplus II ES11000 was used for digital holograms recording. The camera has 4008 × 2672 pixels with sizes of 9 μm × 9 μm. For hologram recording, 50 mW frequency-doubled Nd:YAG laser with wavelength 532 nm was used. Liquid crystal on silicon SLM HoloEye PLUTO VIS was used for optical reconstruction of digital holograms. SLM has 1920 × 1080 pixels with sizes of 8 μm × 8 μm. At objects reconstruction 10 mW He-Ne laser with wavelength 632.8 nm was used. Setups for digital holograms recording and their optical reconstruction with the SLM were combined as follows. MegaPlus Central Control Software allows to display registered frames by the camera with a little delay on the computer monitor. The SLM can work as additional monitor. In result displayed frames can be shown on the SLM display in near real-time. Thus recording and reconstruction of the 3D-scenes was obtained in real-time. Preliminary, resolution of displayed frames was chosen equaled to the SLM one. Quantity of the pixels was limited by the SLM resolution. Frame rate was limited by the camera one. This holographic video setup was applied without additional program implementations that would increase time delays between hologram recording and object reconstruction. The setup was demonstrated for reconstruction of 3D-scenes.

Citation Download Citation

Pavel A. Cheremkhin, Nikolay N. Evtikhiev, Vitaly V. Krasnov, Mikhail N. Kulakov, Ekaterina A. Kurbatova, Dmitriy Yu. Molodtsov, and Vladislav G. Rodin "Demonstration of digital hologram recording and 3D-scenes reconstruction in real-time", Proc. SPIE 9889, Optical Modelling and Design IV, 98891M (27 April 2016); https://doi.org/10.1117/12.2227767

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available