Paper
9 August 2016 Integration and verification testing of the Large Synoptic Survey Telescope camera
Travis Lange, Tim Bond, James Chiang, Kirk Gilmore, Seth Digel, Richard Dubois, Tom Glanzman, Tony Johnson, Margaux Lopez, Scott P. Newbry, Martin E. Nordby, Andrew P. Rasmussen, Kevin A. Reil, Aaron J. Roodman
Author Affiliations +
Abstract
We present an overview of the Integration and Verification Testing activities of the Large Synoptic Survey Telescope (LSST) Camera at the SLAC National Accelerator Lab (SLAC). The LSST Camera, the sole instrument for LSST and under construction now, is comprised of a 3.2 Giga-pixel imager and a three element corrector with a 3.5 degree diameter field of view. LSST Camera Integration and Test will be taking place over the next four years, with final delivery to the LSST observatory anticipated in early 2020. We outline the planning for Integration and Test, describe some of the key verification hardware systems being developed, and identify some of the more complicated assembly/integration activities. Specific details of integration and verification hardware systems will be discussed, highlighting some of the technical challenges anticipated.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Travis Lange, Tim Bond, James Chiang, Kirk Gilmore, Seth Digel, Richard Dubois, Tom Glanzman, Tony Johnson, Margaux Lopez, Scott P. Newbry, Martin E. Nordby, Andrew P. Rasmussen, Kevin A. Reil, and Aaron J. Roodman "Integration and verification testing of the Large Synoptic Survey Telescope camera", Proc. SPIE 9911, Modeling, Systems Engineering, and Project Management for Astronomy VII, 991108 (9 August 2016); https://doi.org/10.1117/12.2234506
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Large Synoptic Survey Telescope

Camera shutters

Metrology

Optical fabrication

Optical filters

Calibration

RELATED CONTENT

4MOST metrology system lab calibration and performance
Proceedings of SPIE (August 29 2022)
The LSST commissioning camera status and progress
Proceedings of SPIE (July 06 2018)
Mechanical design of the LSST camera
Proceedings of SPIE (July 23 2008)
OmegaCAM: wide-field imaging with fine spatial resolution
Proceedings of SPIE (September 30 2004)
SPHERE IRDIS assembly, integration and testing from bits and...
Proceedings of SPIE (September 24 2012)

Back to Top