Ana Cutukhttps://orcid.org/0000-0002-5299-3759,1 Peter Gierss,1 Maxim Leyzner,1 Kai Currle,1 Uwe Brauch,1 Marwan Abdou Ahmed,1 Michael Jetter,1 Thomas Graf,1 Peter Michler1
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
While vertical external-cavity surface-emitting lasers (VECSELs) provide several superior laser properties, the heat generated by the pump laser within the active region proves to be a limiting factor for achieving higher output powers.
We present our recent progress in the development of an AlGaInP-VECSEL based on a grating waveguide structure. The heat spreader is placed below the active region membrane while a grating structure is etched into the top layer of the active region. This improves the heat removal from the membrane, while the guided-mode resonances should provide good coupling of the pump and laser field as well as a high reflectivity. The VECSEL cavity is completed with an external mirror, serving also as an output coupler.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Ana Cutuk, Peter Gierss, Maxim Leyzner, Kai Currle, Uwe Brauch, Marwan Abdou Ahmed, Michael Jetter, Thomas Graf, Peter Michler, "Design and characterization of AlGaInP-VECSELs with a grating waveguide structure," Proc. SPIE PC12897, High Contrast Metastructures XIII, PC128970Y (13 March 2024); https://doi.org/10.1117/12.3002741