Self-aligned blocking integration demonstration for critical sub-30-nm pitch Mx level patterning with EUV self-aligned double patterning

Angélique Raley; Joe Lee; Jeffrey T. Smith; Xinghua Sun; Richard A. Farrell; Jeffrey Shearer; Yongan Xu; Akiteru Ko; Andrew W. Metz; Peter Biolsi; Anton Devilliers; John Arnold; Nelson Felix

doi:10.1117/1.JMM.18.1.011002

31 July 2018 Self-aligned blocking integration demonstration for critical sub-30-nm pitch Mx level patterning with EUV self-aligned double patterning

Angélique Raley, Joe Lee, Jeffrey T. Smith, Xinghua Sun, Richard A. Farrell, Jeffrey Shearer, Yongan Xu, Akiteru Ko, Andrew W. Metz, Peter Biolsi, Anton Devilliers, John Arnold, Nelson Felix

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 18, Issue 1, 011002 (July 2018). https://doi.org/10.1117/1.JMM.18.1.011002

Abstract

We report a sub-30-nm pitch self-aligned double patterning (SADP) integration scheme with EUV lithography coupled with self-aligned block technology targeting the back end of line metal line patterning applications for logic nodes beyond 5 nm. The integration demonstration is a validation of the scalability of a previously reported flow, which used 193-nm immersion SADP targeting a 40-nm pitch with the same material sets (Si₃N₄ mandrel, SiO₂ spacer, spin on carbon, spin on glass). The multicolor integration approach is successfully demonstrated and provides a valuable method to address overlay concerns and, more generally, edge placement error as a whole for advanced process nodes. Unbiased line edge roughness (LER)/line width roughness (LWR) analysis comparison between EUV SADP and 193-nm immersion SADP shows that both integrations follow the same trend throughout the process steps. While EUV SADP shows increased LER after mandrel pull, metal hardmask open, and dielectric etch compared to 193-nm immersion SADP, the final process performance is matched in terms of LWR (1.08-nm 3 sigma unbiased) and is 6% higher than 193-nm immersion SADP for average unbiased LER. Using EUV, SADP enables almost doubling the line density while keeping most of the remaining processes and films unchanged and provides a compelling alternative to other multipatterning integrations, which present their own sets of challenges.

Citation Download Citation

Angélique Raley, Joe Lee, Jeffrey T. Smith, Xinghua Sun, Richard A. Farrell, Jeffrey Shearer, Yongan Xu, Akiteru Ko, Andrew W. Metz, Peter Biolsi, Anton Devilliers, John Arnold, and Nelson Felix "Self-aligned blocking integration demonstration for critical sub-30-nm pitch Mx level patterning with EUV self-aligned double patterning," Journal of Micro/Nanolithography, MEMS, and MOEMS 18(1), 011002 (31 July 2018). https://doi.org/10.1117/1.JMM.18.1.011002

Received: 14 May 2018; Accepted: 15 June 2018; Published: 31 July 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE