Investigation of combined optical and thermal effects on phosphor converted light-emitting diodes with liquid immersion cooling

Halil Ibrahim Kahvecioglu; Enes Tamdogan; Mehmet Arik

doi:10.1117/1.OE.57.5.055101

8 May 2018 Investigation of combined optical and thermal effects on phosphor converted light-emitting diodes with liquid immersion cooling

Halil Ibrahim Kahvecioglu, Enes Tamdogan, Mehmet Arik

Author Affiliations +

Optical Engineering, Vol. 57, Issue 5, 055101 (May 2018). https://doi.org/10.1117/1.OE.57.5.055101

Abstract

The inclusion of phosphor into a high brightness light-emitting diode (LED) package is a complicated task since LEDs are encapsulated with a phosphor and epoxy mixture to convert blue photons to white light. Moreover, this common practice may cause high temperatures and fractures in the gold wire bonds of the chip or solder balls due to local heating and thermal stresses leading to device failures. Furthermore, at elevated junction temperatures, the light conversion efficiency of the phosphor reduces and decreases the overall optical efficiency of an LED. Although, remote phosphor technique has been already applied to LED systems, the high power requirements have needed better performing methods. Thus, an immersion liquid cooled remote phosphor-coated system has been proposed and experimentally and computationally investigated. First, a set of experiments was performed, which includes the combined effects coming from both optical and thermal improvements with the proposed liquid cooled remote phosphor-coated technique, where the total light extraction enhancement was obtained in excess of 25%. Then, the same problem has been computationally studied for investigation of solely optical enhancements, which has shown that remote phosphor-coated LED package with a liquid coolant of suitable refractive index at the optical path has enhanced the overall lumen performance about 13%, whereas the rest of the improvements of 12% were due to thermal enhancements.

Citation Download Citation

Halil Ibrahim Kahvecioglu, Enes Tamdogan, and Mehmet Arik "Investigation of combined optical and thermal effects on phosphor converted light-emitting diodes with liquid immersion cooling," Optical Engineering 57(5), 055101 (8 May 2018). https://doi.org/10.1117/1.OE.57.5.055101

Received: 23 December 2017; Accepted: 10 April 2018; Published: 8 May 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available