Paper
1 August 1990 Cophasing segmented mirrors with large surface errors using physical and geometrical ray-based techniques
Author Affiliations +
Proceedings Volume 1271, Adaptive Optics and Optical Structures; (1990) https://doi.org/10.1117/12.20398
Event: The International Congress on Optical Science and Engineering, 1990, The Hague, Netherlands
Abstract
Phasing an array with steep slopes and large surface errors, such as in NASA's Precision Segmented Reflector (PSR) Program for submillimeter astrophysics, is difficult using conventional optical techniques because the surface errors on the panels are large as compared with optical wavelengths. This paper extrapolates a procedure proposed by the Keck Observatory whereby physical optical techniques phase the edges of the panels, but with this technique they are phased with respect to a reference surface obtained from a high-quality central panel. A full-surface height-map is thereby obtained by integrating slope measurements, and full-surface phasing can be achieved using the modified and conventional Shack-Hartmann camera.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul K. Manhart "Cophasing segmented mirrors with large surface errors using physical and geometrical ray-based techniques", Proc. SPIE 1271, Adaptive Optics and Optical Structures, (1 August 1990); https://doi.org/10.1117/12.20398
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Wavefront sensors

Adaptive optics

Cameras

Segmented mirrors

Wavefronts

Geometrical optics

Reflectors

Back to Top