Development and integration of a new metal structuring process for 256 MDRAMs

Wolfgang Leiberg; E. Lueken; Sven Schmidbauer; Mirko Vogt; Lothar Bauch; P. Moll; V. Polei; J. Bachmann

doi:10.1117/12.360576

11 August 1999 Development and integration of a new metal structuring process for 256 MDRAMs

Wolfgang Leiberg, E. Lueken, Sven Schmidbauer, Mirko Vogt, Lothar Bauch, P. Moll, V. Polei, J. Bachmann

Proceedings Volume 3883, Multilevel Interconnect Technology III; (1999) https://doi.org/10.1117/12.360576
Event: Microelectronic Manufacturing '99, 1999, Santa Clara, CA, United States

Abstract

The reduction of chip size by using the stitched word line architecture for the 256 M DRAM design demands a maximum metal sheet resistance of 140 mOhm/sq. To meet this requirement a metal thickness of 380 nm is necessary. Our investigations showed that the lithographic as well as the process window of the metal etch process are significantly widened by using a hardmask for the metal etch. The hardmask deposition doesn't have any detrimental effect on the metal film. Both processes, the mask open etch and the metal etch, can be used to adjust the final metal dimension. The key for saving a high metal short yield is the clean after mask open etch. Because of the absence of resist during the metal etch, the formation of polymer rails along the metal lines is suppressed and the post metal etch clean is no longer necessary. The new metal etch process was checked within volume production of the 64 M DRAM without any yield loss. In addition, several reliability investigations don't show any problems. This hardmask metal etch process has, because of the low resist thickness, a large potential for further shrinking.

Citation Download Citation

Wolfgang Leiberg, E. Lueken, Sven Schmidbauer, Mirko Vogt, Lothar Bauch, P. Moll, V. Polei, and J. Bachmann "Development and integration of a new metal structuring process for 256 MDRAMs", Proc. SPIE 3883, Multilevel Interconnect Technology III, (11 August 1999); https://doi.org/10.1117/12.360576

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available