Understanding mechanics and stress effects in RAINBOW and THUNDER stress-biased actuators

Robert W. Schwartz; Pitak Laoratanakul; William D. Nothwang; John M. Ballato; Youngwoo Moon; Alison Jackson

doi:10.1117/12.388220

14 June 2000 Understanding mechanics and stress effects in RAINBOW and THUNDER stress-biased actuators

Robert W. Schwartz, Pitak Laoratanakul, William D. Nothwang, John M. Ballato, Youngwoo Moon, Alison Jackson

Proceedings Volume 3992, Smart Structures and Materials 2000: Active Materials: Behavior and Mechanics; (2000) https://doi.org/10.1117/12.388220
Event: SPIE's 7th Annual International Symposium on Smart Structures and Materials, 2000, Newport Beach, CA, United States

Abstract

Rainbow and Thunder actuators constitute a family of 'stress-biased' devices that display enhanced strain and load-bearing capabilities in comparison to traditional flextensional devices. For both of these actuators, doming occurs during the cooling phase of the fabrication process to relieve thermal expansion mismatch between the metallic and piezoelectric layers. Accompanying dome formation is the development of a tensile stress within the surface region of the piezoelectric layer that can approach 400 MPa. This tensile stress affects the ferroelectric domain configuration and improves the 90 percent domain wall movement within the surface region of the piezoelectric under an applied electric field. It has been reported that this effect is responsible for the enhanced electromechanical performance of these devices. The results of the presented study, however, suggest that in addition to stress, other mechanical and mass loading effects may also play a role in the enhanced performance of these devices. Equivalent circuit and finite element modeling studies of these stress-biased actuators are reported, and in particular, the effects of specimen geometry on internal stress in the piezoelectric layer are discussed. Finite element analysis shows that in the surface region of the piezoelectric, the highest tensile stresses are, in fact, predicted for those devices that display the greatest displacement performance, i.e., devices that have a piezoelectric layer that is approximately twice as thick as the 'metallic' layer. However, equivalent circuit studies show that the highest predicted strains should also be observed for samples with similar geometries yet this approach does not include stress effects. This implies that not only stress, but also mass loading and other mechanical effects must also be considered in predicting optimum design geometries.

Citation Download Citation

Robert W. Schwartz, Pitak Laoratanakul, William D. Nothwang, John M. Ballato, Youngwoo Moon, and Alison Jackson "Understanding mechanics and stress effects in RAINBOW and THUNDER stress-biased actuators", Proc. SPIE 3992, Smart Structures and Materials 2000: Active Materials: Behavior and Mechanics, (14 June 2000); https://doi.org/10.1117/12.388220

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available