Paper
24 December 2002 Topography measurement of nanometer synchrotron optics
Jens Illemann, Ralf D. Geckeler, Ingolf Weingartner, Carsten Schlewitt, Bernd Grubert, Olaf Schnabel
Author Affiliations +
Abstract
The technological limit on the beam quality when modern synchrotron radiation sources are used is determined by the geometrical accuracy of the optical components. This in turn is limited by the accuracy of the measuring technique which is within the range of up to 0.05 arcsec rms for one meter mirror length, which corresponds (in the absence of waviness) to an uncertainty of the topography of 5 nm rms. If the topography can be measured with higher accuracy, modern methods of ion beam processing allow the surface to be postprocessed with a high resolution of depth. We will present first tests with a novel measuring device which allows deflectometric measurements by the ESAD principle (Extended Shear Angle Difference) to be carried out. The basic item of this device is a commercial electronic autocollimator (AC) whose exit aperture is tripartite. By suitable evaluation one is in consequence able to simultaneously determine the angle information belonging to three surface points situated next to one another. According to the ESAD method, the angular topography can be completely reconstructed from two sets of angular difference data. The uncertainty of measurements of angular difference is transferred with a factor close to 1 to that of the set of reconstructed angle. First measurements show a reproducibility of about 25 milli-arcsec rms at a time of integration of 0.4 seconds per point. With this set-up, in the first order, no guide errors, vibrations or air turbulences enter.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jens Illemann, Ralf D. Geckeler, Ingolf Weingartner, Carsten Schlewitt, Bernd Grubert, and Olaf Schnabel "Topography measurement of nanometer synchrotron optics", Proc. SPIE 4782, X-Ray Mirrors, Crystals, and Multilayers II, (24 December 2002); https://doi.org/10.1117/12.450982
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Head

Autocollimators

Prisms

Zerodur

Mirrors

Optical testing

RELATED CONTENT

Absolute flatness testing of large synchrotron optics
Proceedings of SPIE (September 18 2014)
Latest metrology results with the SOLEIL synchrotron LTP
Proceedings of SPIE (September 15 2005)
Advantages of in situ LTP distortion profile test on high...
Proceedings of SPIE (November 22 1996)
High-accuracy form measurement of large optical surfaces
Proceedings of SPIE (November 20 2003)
Mirror metrology and bender characterization at ESRF
Proceedings of SPIE (September 16 2005)

Back to Top