The design and testing of an active 190-GHz imaging system is presented. The system features two beam-scanning antennas, one of which transmits a vertical fan beam, and the other which receives a horizontal fan beam. By correlating the transmitted and received signals, an output is obtained that is proportional to the millimeter-wave reflectivity at the intersection of the two fan beams. Beam scanning is obtained by rotating a small subreflector within each antenna, allowing rapid scanning. The system has an angular resolution of 0.3 deg, a field of view of 14×14 deg, and operates at a standoff distance of 5 m.
We have designed a terahertz imaging system, built with electronic components and operating at a single tunable
frequency. The system scans in hybrid mode, combining coarse mechanical positioning with a fine scan produced
by perturbing the beam with a system of opaque masks, placed into the collimated beam. The mask set is
based on a modified Hadamard design, which aims at minimizing the loss of power and noise effects. The image
acquisition is performed in transmission mode, with the sample placed at the focal plane. We present several
imaging results obtained using our technique.
The performance of a high temperature superconducting junction detector is evaluated. The detector has been built to
explore applications of terahertz imaging.
The detector device is a high-temperature superconductor (HTS) Josephson junction, which is integrated with a thin-film
ring-slot antenna. The ring-slot antenna is patterned on a magnesium oxide (MgO) substrate which is compatible with
the detector's YBCO superconducting material lattice. A hyper-hemispherical lens made from high resistivity float zone
silicon (HRFZ-Si) is mounted on the rear side of the substrate. The lens couples energy from an imaging system onto the
antenna which couples the energy into the device.
An existing terahertz imaging system is used in conjunction with the detector to allow for the exploration of relevant
applications. The imaging system is based on a conventional quasi-optical design with a backward-wave oscillator as the
source and raster scans samples for image acquisition. The imaging capability of the system has been assessed by
trialing a range of applications in both transmission and reflection modes. Applications explored include imaging
concealed weapons in packaging, non-destructive testing of materials, and imaging devices through plastic structures.
The results generated by the imaging system demonstrate its capability for these applications.
A prototype of terahertz imaging system has been built in CSIRO. This imager uses a backward wave oscillator as the
source and a Schottky diode as the detector. It has a bandwidth of 500-700 GHz and a source power 10 mW. The
resolution at 610 GHz is about 0.85 mm. Even though this imaging system is a coherent system, only the signal power is
measured at the detector and the phase information of the detected wave is lost. Some initial images of tree leaves,
chocolate bars and pinholes have been acquired with this system. In this paper, we report experimental results of an
attempt to improve the resolution of this imaging system beyond the limitation of diffraction (super-resolution). Due to
the lack of phase information needed for applying any coherent super-resolution algorithms, the performance of the
incoherent Richardson-Lucy super-resolution algorithm has been evaluated. Experimental results have demonstrated that
the Richardson-Lucy algorithm can significantly improve the resolution of these images in some sample areas and
produce some artifacts in other areas. These experimental results are analyzed and discussed.
This paper describes the design, implementation and measurements of a detector for imaging purposes at terahertz
frequencies. The detector comprises of a ring slot antenna coupled to a high temperature superconducting Josephson
Junction device. The detector was shown to respond to an incident field at 0.6 THz. An imaging system was constructed
to test the detector's ability to generate images at 0.6 THz. Images have been acquired that demonstrate the ability of the
detector to operate in an imaging mode in scenarios that exploit terahertz radiation's unique properties including
penetration through packaging, sensitivity of water and millimeter scale resolution.
The design and testing of a 190 GHz imaging system is presented. The system features two beam-scanning antennas; the first transmits a horizontal fan beam and the second receives a vertical fan beam. By correlating the signals from the antennas, an estimate of the millimeter-wave reflectivity at the intersection of the fan beams is obtained. Each fan beam is scanned by rotating a small subreflector within the antenna; this simple rotation motion allows rapid scanning. The system is portable, currently approximately 0.6m × 0.6m × 2m high; the key size constraint is imposed by the 450 mm aperture length of the antennas. The imager has an angular resolution of 0.25° and a field of view of 14°×14°, resulting in a raw image of approximately 50 × 50 pixels. The raw image is processed using super-resolution techniques. Images will be presented which show the capability of the system to image metallic and ceramic objects beneath clothing. These images were obtained by illuminating the scene with signals from a frequency-doubled Gunn oscillator. While this paper focuses on active imaging, the system can also operate in passive mode with reduced sensitivity.
A prototype cross-correlating 190 GHz passive mm-wave imaging system has been developed. This system is based on the Mills Cross system used for radio astronomical imaging. It uses two pillbox antennas arranged in a T configuration. Each antenna generates a fan beam and the two fan beams are orthogonal to each other. By cross-correlating signals received from the two antennas, an output is obtained which is proportional to the millimeter-wave intensity radiated from the target at the intersection of the two fan beams. Beam scanning is generated by rotating a small sub-reflector inside each antenna. As a result, these relatively heavy antennas are stable during scanning and a high frame rate can be achieved. Another advantage of this approach is that only two receivers are required. The baseline (the displacement between phase centers of the two antennas) of this system is not zero, because the phase centers of the two antennas are not located at the same position. The baseline generates a fringe in the imaging system and its influence on the performance of the system is analyzed in this paper. The scanning speed of this system is also much faster than that of the Mills Cross imaging system and its influence on the resolution is also analyzed. It is found that the effect of the scanning speed is minimized when the beam scans along the equal-phase line of the fringe. This system can also be used as an active imaging system and this is discussed in another paper.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.