The quality and value of precious stones is determined by a set of indicators such as color, purity, dimension, type and quality of cut. This article is devoted to the problem of assessment of the color of precious stones as one of the crucial quality indicators. To date, the color is usually evaluated by an expert who relies on his/her own color perception and a set of master stones (precious stones color standards). The authors propose an alternative way of determining the color using special hardware and software and standard colorimetric techniques. On the example of green ("emerald") shades the possibility of digital classification of precious stones by color is shown.
Broken glass being the waste in many fields of production is usually used as a raw material in the production of construction materials. The purity level of collected and processed glass cullet, as a rule, is quite low. Direct usage of these materials without preliminary processing leads to the emergence of defects in the end product or sometimes even to technological downtime. That’s why purity control of cullet should be strictly verified. The study shows the method of construction and requirements for an optical-electronic system designed for cullet separation. Moreover, the author proposes a registration channel scheme and shows a scheme of control exposure area. Also the issues of image processing for the implementation of a typical system are examined.
Development of lighting technology has led to possibility of using LEDs in the specialized devices for outdoor, industrial (decorative and accent) and domestic lighting. In addition, LEDs and devices based on them are widely used for solving particular problems. For example, the LED devices are widely used for lighting of vegetables and fruit (for their sorting or growing), textile products (for the control of its quality), minerals (for their sorting), etc. Causes of active introduction LED technology in different systems, including optical-electronic devices and systems, are a large choice of emission color and LED structure, that defines the spatial, power, thermal and other parameters. Furthermore, multi-element and color devices of lighting with adjustable illumination properties can be designed and implemented by using LEDs. However, devices based on LEDs require more attention if you want to provide a certain nature of the energy or color distribution at all the work area (area of analysis or observation) or surface of the object. This paper is proposed a method of theoretical modeling of the lighting devices. The authors present the models of RGB multicomponent light source applied to optical-electronic system for the color analysis of mineral objects. The possibility of formation the uniform and homogeneous on energy and color illumination of the work area for this system is presented. Also authors showed how parameters and characteristics of optical radiation receiver (by optical-electronic system) affect on the energy, spatial, spectral and colorimetric properties of a multicomponent light source.
The paper presents the research results of pegmatites from Karelian deposits. The aim of this research was to find selective features of microcline, biotite, muscovite, quartz, and plagioclase for determining the opportunity of their selection from original ore by optical sorting method which based on color differences of analyzed objects. Studies have shown that the solution of the problem of these minerals separation is possible in 3 stages. In the first stage groups "microcline", "muscovite and biotite", "quartz and plagioclase," are separated according to the values of channels hue H and lightness L in the color model HLS. In the second stage biotite and muscovite are separated from each other by the values of the channel hue H and saturation S. Finally, in the third stage couple "quartz - plagioclase" are separated. But these minerals are indistinguishable from each other by color, so it's proposed to separate them by selective feature "surface structure."
Color is one of the most important metrics of foodstuffs quality. It gives an indication of freshness, ingredient composition as well as about the presence or absence of falsification. Most often, the color is estimated visually, and thus, the evaluation is subjective. By automating the color analysis a wide application for this method could be found. The aim of this research is to study the principles of color analysis as applied to the task of evaluating the freshness of meat products using modern machine vision systems. From a scientific point of view, the color of meat depends on the proportion of myoglobin and its derivatives. It's the main pigment that characterizes the freshness of meat. Further color of meat can change due to oxidation of myoglobin during storage. Myoglobin exists in three forms. There are oxygenated form, oxidized form and form without oxygen. The meat color changes not only due to the conversion of one form into another. The content of amino acids and ammonia are another characteristics and constant signs of meat products spoilage. The paper presents the results of meat color computer simulation based on data on the content of various forms of myoglobin in different proportions. The spectral characteristic of the light source used to illuminate the meat sample is taken into account. Also the experimental studies were conducted using samples of beef. As a result the correlations between said biochemical indicators of the quality and color of the meat obtained with the help of machine vision system were found.
Due to the depletion of solid minerals ore reserves and the involvement in the production of the poor and refractory ores a process of continuous appreciation of minerals is going. In present time at the market of enrichment equipment are well represented optical sorters of various firms. All these sorters are essentially different from each other by parameters of productivity, classes of particles sizes for processed raw, nuances of decision algorithm, as well as by color model (RGB, YUV, HSB, etc.) chosen to describe the color of separating mineral samples. At the same time there is no dressability estimation method for mineral raw materials without direct semi-industrial test on the existing type of optical sorter, as well as there is no equipment realizing mentioned dressability estimation method. It should also be note the lack of criteria for choosing of one or another manufacturer (or type) of optical sorter. A direct consequence of this situation is the "opacity" of the color sorting method and the rejection of its potential customers. The proposed solution of mentioned problems is to develop the dressability estimation method, and to create an optical-electronic system for express analysis of mineral raw materials dressability by color sorting method. This paper has the description of structure organization and operating principles of experimental model optical-electronic system for express analysis of mineral raw material. Also in this work are represented comparison results of the proposed optical-electronic system and the real color sorter.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.