An exhausted capacity of current Passive Optical Networks has been anticipated as bandwidth-hungry applications such as HDTV and 3D video become available to end-users. To enhance their performance, the next generation optical access networks have been proposed, using optical carriers allocated within the E-band (1360-1460 nm). It is partly motivated by the low-water peak fiber being manufactured by Corning. At these wavelengths, choices for low cost optical amplifiers, with compact size, low energy consumption and feasibility for integration with other optoelectronic components are limited, making the semiconductor optical amplifiers (SOA) a realistic solution. An experimental characterization of a broadband and low polarization sensitive asymmetric multi quantum well (MQW) SOA operating in the E-band is reported. The SOA device is composed of nine 6 nm In1-xGaxAsyP1-y 0.2% tensile strained asymmetric MQW layers sandwiched between nine latticed matched 6 nm InGaAsP barrier layers. The active region is grown on an n-doped InP substrate and buried by p-doped InGaAsP layers. The SOA devices have 7-degrees tilt anti-reflected coated facets, with 2 μm ridge width, and a cavity length of 900 μm. For input powers of -10 dBm and -20 dBm, a maximum gain of 20 dB at 1360 nm with a polarization insensitivity under 3 dB for over 90 nm bandwidth is measured. Polarization sensitivity of less than 0.5 dB is observed for some wavelengths. Obtained results indicate a promising SOA with broadband amplification, polarization insensitivity and high gain. These SOAs were designed and characterized at the Photonics Technology Laboratory, University of Ottawa, Canada.
An experimental characterization of broadband semiconductor optical amplifiers (SOAs) at 1360 nm is reported. In addition to their inherent small size, fast dynamics, and feasibility of integration with other optoelectronic components, the relevance of the multi quantum well (MQW) asymmetric SOAs here reported relies on the achievement of a flat and broad 3 dB amplification bandwidth. SOAs are composed of nine In1-xGaxAsyP1-y 0.2% tensile strained MQW layers separated by latticed matched InP barriers. The asymmetry of the active region is based on the difference of the molar concentrations, with Ga (x) ranging from 0.46 to 0.47 and As (y) ranging from 0.89 to 0.94. Devices under test have 7 degrees tilt cleaved facets and feature different geometries: ridge widths from 2 to 4 μm in steps of 0.25 μm, and cavity lengths of 600, 900, 1200, and 1500 μm. Fabry-Pérot (FP) lasers with the same material composition as the SOAs and within the same wafer are used as test structures for parameters extraction, providing a feedback mechanism for further design improvement. The ridge width of the FP lasers varies from 2 to 8 μm, in steps of 2 μm. All the devices have been designed and characterized at the Photonics Technology Laboratory, Centre for Research in Photonics, fabrication was done at Canadian Photonics Fabrication Centre (CPFC), Canada and supported by CMC Microsystems.
Devices under test are DC-biased and temperature controlled at 25°C. A single pass gain of 13.5 dB is measured for a 3 dB bandwidth of 60 nm centred at 1360 nm. Light-current plots obtained from the FP lasers show that the threshold current varies with the cavity length, with a minimum of 80 mA for a cavity length of 600 μm and a ridge width of 2 μm. A thermal roll-off occurring at high injection currents is observed, especially with the smallest cavity length. In conclusion, asymmetric MQW SOAs featuring different ridge widths and cavity lengths have been
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.