In a waveguide-type display for augmented reality, the image is injected in the waveguide and extracted in front of the eye appearing superimposed on the real world scene. An elegant and compact way of coupling these images in and out is by using blazed gratings, which can achieve high diffraction efficiencies, thereby reducing stray light and decreasing the required power levels. This study investigates the fabrication of blazed gratings with grayscale electron beam lithography and the subsequent replication of the realized 3D grating structures in a polymer material with ultraviolet nanoimprint lithography. As such, diffractive elements are realized on a waveguide sheet, with very good control over the dimensions and the profile of the printed features. Blazed gratings are designed for green light (λ= 543 nm) and a diffraction angle of 43°. Making use of a PMMA resist and by carefully optimizing the electron-beam parameters, electron dose distributions and development step, blazed gratings with a pitch of 508 nm and a fill factor of 0.66 are achieved. Finally, a master is realized with two blazed gratings, 3 cm apart, which are replicated using ultraviolet nanoimprint lithography onto a waveguide sheet. The in- and outcoupling of an image through these two blazed gratings is shown, appearing sharp and non-distorted in the environment, and a throughput efficiency of 17.4% is confirmed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.