Dr. P. S. Pandian Profile

Dr. P. S. Pandian

Scientist at Indian Institute of Technology

SPIE Involvement:

Author

Publications (3)

Proceedings Article | 31 March 2008 Paper

Growth of CNT array for physiological monitoring applications

J. K. Radhakrishnan, H. Bhusan, P. Pandian, K. U. B. Rao, V. C. Padaki, K. Aatre, J. Xie, J. Abraham, V. Varadan

Proceedings Volume 6931, 69310P (2008) https://doi.org/10.1117/12.798231

KEYWORDS: Carbon nanotubes, Electrodes, Scanning electron microscopy, Chemical vapor deposition, Electroencephalography, Argon, Annealing, Titanium, Semiconducting wafers, Carbon

Read Abstract +

Proceedings Article | 26 March 2008 Paper

Low noise multi-channel biopotential wireless data acquisition system for dry electrodes

P. S Pandian, Ashwin Whitchurch, Jose Abraham, Himanshu Bhusan Baskey, J. K. Radhakrishnan, Vijay Varadan, V. C. Padaki, K. U. Bhasker Rao, R. Harbaugh

Proceedings Volume 6931, 69310Q (2008) https://doi.org/10.1117/12.798234

KEYWORDS: Electrodes, Skin, Electrocardiography, Signal processing, Amplifiers, Data acquisition, Electroencephalography, Electromyography, Resistance, Interference (communication)

Read Abstract +

The bioelectrical potentials generated within the human body are the result of electrochemical activity in the excitable cells of the nervous, muscular or glandular tissues. The ionic potentials are measured using biopotential electrodes which convert ionic potentials to electronic potentials. The commonly monitored biopotential signals are Electrocardiogram (ECG), Electroencephalogram (EEG) and Electromyogram (EMG). The electrodes used to monitor biopotential signals are Ag-AgCl and gold, which require skin preparation by means of scrubbing to remove the dead cells and application of electrolytic gel to reduce the skin contact resistance. The gels used in biopotential recordings dry out when used for longer durations and add noise to the signals and also prolonged use of gels cause irritations and rashes to skin. Also noises such as motion artifact and baseline wander are added to the biopotential signals as the electrode floats over the electrolytic gel during monitoring. To overcome these drawbacks, dry electrodes are used, where the electrodes are held against the skin surface to establish contact with the skin without the need for electrolytic fluids or gels. The major drawback associated with the dry electrodes is the high skin-electrode impedance in the low frequency range between 0.1-120 Hz, which makes it difficult to acquire clean and noise free biopotential signals. The paper presents the design and development of biopotential data acquisition and processing system to acquire biopotential signals from dry electrodes. The electrode-skin-electrode- impedance (ESEI) measurements was carried out for the dry electrodes by impedance spectroscopy. The biopotential signals are processed using an instrumentation amplifier with high CMRR and high input impedance achieved by boot strapping the input terminals. The signals are band limited by means of a second order Butterworth band pass filters to eliminate noise. The processed biopotential signals are digitized and transmitted wirelessly to a remote monitoring station.

Proceedings Article | 11 July 2007 Paper

Detection of abnormalities in tissues equivalent phantoms by multi-probe laser reflectometry

P. Pandian, M. Kumaravel, Megha Singh

Proceedings Volume 6628, 66281D (2007) https://doi.org/10.1117/12.727886

KEYWORDS: Tissues, Scattering, Sensors, Absorption, Photons, Monte Carlo methods, Natural surfaces, Reflectometry, Reflectivity, Optical properties

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years