The first NASA spacecraft to visit and explore planet Venus since the 1990s will be the Venus Emissivity, Radio science, InSAR, Topography, And Spectroscopy mission (VERITAS) orbiter. The Venus Emissivity Mapper (VEM) onboard the spacecraft is designed for surface mapping of Venus within dedicated atmospheric spectral windows. The instrument will provide global coverage for the detection of thermal emissions like volcanic activity, surface rock composition, water abundance, cloud formation and their dynamics by observing 14 narrow filter bands in the near-infrared to short-wave infrared (NIR, SWIR) range of 790 nm to 1510 nm. An almost identical instrument will be part of ESA’s recently announced EnVision mission to Venus, the VenSpec-M in the Venus Spectroscopy Suite (VenSpec). The utilized photodetector for both missions will be an InGaAs type imaging sensor with integrated thermoelectric (TE) cooling, comprising a 640x512 pixel array with 20 μm pixel pitch.
In general, a space environmental qualification of electronic devices combines its susceptibility to radiation induced single event effects (SEE) and the evaluation of permanent degradation effects due to total ionizing dose (TID) and displacement damage dose (DDD). Following a successful qualification test with heavy-ions focusing on SEE, our imaging sensor was subject to a proton irradiation test campaign at Helmholtz-Zentrum Berlin (HZB) for combined TID and DDD testing. To track the sensor evolution, we subdivided the proton fluence into 10 irradiation steps with intermediate measurements. The collected data provide information on the evolution of dark current, light sensitivity and pixels showing randomtelegraph- noise (RTN) on the sensor during a 5-year mission.
We report on the current Venus Emissivity Mapper (VEM) instrument design and development status onboard NASAs Venus Emissivity, Radio science, InSAR, Topography, And Spectroscopy (VERITAS) and ESAs EnVision orbiters. The VEM instrument is a push broom multispectral imager that comprises an optical system based on a sophisticated filter assembly with 14 spectral bands and an InGaAs detector with integrated thermoelectric cooler. A turn window mechanism and a two-staged baffle in front of the optics protect the instrument against contamination and straylight. The instruments nominal mass is approximately 6 kg. VEM opens the path for mapping Venus surface emission with a global coverage of >70%.
The Venus Emissivity Mapper (VEM) as part of NASAs Venus Emissivity, Radio science, InSAR, Topography, And Spectroscopy mission (VERITAS) is designed for mapping the surface of Venus within dedicated atmospheric spectral windows. The instrument will provide global coverage for detection of thermal emissions like volcanic activity, surface rock composition, water abundance and cloud formation as well as dynamics by observing 15 narrow filter bands in the near infrared to short wavelength infrared (NIR, SWIR) range of 862 nm to 1510 nm. An almost identical instrument will be part of ESAs EnVision mission to Venus, the VenSpec-M in the Venus Spectroscopy Suite (VenSpec). The utilized photodetector is an InGaAs type imaging sensor with integrated thermoelectric (TE) cooling. It comprises a 640x512 pixel array with 20 μm pixel pitch. Following the mission requirements we irradiated the detector with a set of ions of various stopping powers and range distributions from lower energy Argon (Ar) to higher energy Xenon (Xe). Therefore, exploiting the mentioned ions and proper tilt angles during irradiation, our data covers a Linear Energy Transfer (LET) range of 7 to 75 MeVcm2/mg which fulfills NASA/JPL led space qualification standards (up to 75 MeVcm2/mg) as well as ESA space qualification standards (up to 60 MeVcm2/mg) for heavy-ion irradiation. Our electrical setup consists of a dedicated over-current protection detecting high-current states occurring during irradiation steps and immediate power cycling to prevent physical damage of the device. From the event rates seen during the test we calculated the specific cross-sections and therefore can estimate the expected event rates at Venus during the mission. The detector showed saturated cross-sections below 1E-3 cm2 at 10°C with acceptable event rates for the highest LETs and our applications.
In June 2020 NASA has selected the VERTIAS Discovery mission to Venus for flight. The Venus Emissivity Mapper (VEM) provided by DLR together with the VISAR radar system provided by JPL are the core payload of the mission. VEM is the first flight instrument designed with a focus on mapping the surface of Venus using atmospheric windows around 1 μm wavelength. It will provide a global map of surface composition by observing with six narrow band filters from 0.86 to 1.18 μm. Continuous observation of Venus’ thermal emission will place tight constraints on current day volcanic activity. Eight additional channels provide measurements of atmospheric water vapor abundance as well as cloud microphysics and dynamics and permit accurate correction of atmospheric interference on the surface data. Combining VEM with a high-resolution radar mapper on the NASA VERITAS and ESA EnVision missions will provide key insights in the divergent evolution of Venus. After several years of pre-development including the setup of a laboratory prototype the implementation for flight has started with the qualification of the flight detectors, the review of all requirements flowdowns as well as the finalizing of spacecraft interfaces.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.