To enhance the complexity of the output sequence of the optical injection structure and improve the security of the bit plane encryption, this work proposes an image encryption algorithm based on optical chaos and quadrature amplitude modulation (QAM)-like. The external disturbance generated by the mutual injection of the dual-drive laser improves the complexity of the optical chaos output from the laser in the optical injection structure. In the image encryption algorithm, this work adopts a QAM-like coding mode, which encrypts the pixel value of the plaintext image by transforming the coordinates of the QAM constellation diagram and the coding. In the coding stage, the different coding modes of QAM-like are selected using the encryption sequence composed of optical chaotic sequence and key to transform the color plaintext image into the coded image, and the pixel value of the plaintext image is changed. In the scrambling stage, the encrypted sequence is used to scramble the multi-dimensional rows and columns of the three-dimensional coded image, and the position information of the pixel points is encrypted. In the diffusion stage, the scrambled images of each color component are diffused by GF(17) multiplication and finally merged to generate ciphertext images. Simulation results show that the proposed image encryption algorithm has sufficient key space and information entropy is close to the theoretical maximum, which can effectively resist known plaintext attacks, selective plaintext attacks, and statistical feature attacks.
A tunable and switchable multi-wavelength random fiber laser (MW-RFL) is proposed and experimentally demonstrated in this work, which consists of a random distributed feedback mechanism, an improved Lyot filter, and a nonlinear optical loop mirror (NOLM). The theoretical derivation and simulation analysis of the improved Lyot filter are carried out by using the transfer matrix theory. The results show that by adjusting the polarization controller (PC) in the filter, not only the channel interval can be switched between 0.9 and 0.45 nm, but also the extinction ratio (ER) of the transmission spectrum can be adjusted and the wave peak position can be moved. The feedback mechanism of the proposed laser is provided by the randomly distributed backward Rayleigh scattering generated in the single-mode fiber. By changing the pump laser power, the number of output laser channels will be linearly increased. When the channel interval is kept constant, the wavelength can be tuned within a certain range by carefully adjusting the PC3 in the NOLM. When the channel interval of the spectrum is 0.9 nm, the wavelength tuning ranges of the three and four laser channels are 3.6 and 3.5 nm, respectively. When the channel interval of the spectrum is 0.45 nm, the wavelength tuning ranges of the three and four laser channels are 2.8 and 2.77 nm, respectively. Then the variations of the output spectrum when using 25 km single-mode fiber (SMF) are studied. It is observed that the linewidth and side mode suppression ratio (SMSR) of the laser channel are significantly increased. Finally, the stability of the random laser is discussed, and the maximum central wavelength drift and peak power fluctuation measured at room temperature are 0.05 nm and 0.34 dB, respectively. The average peak power and SMSR are maintained at −4.47 dBm and 34.6 dB, respectively, which confirms that the laser has good stability.
The longitudinal mode distribution in the self-mode-locked (SML) laser with flexible reflectivity and a tilted mirror is investigated. First, the longitudinal mode characteristics of the SML laser are analyzed theoretically. Then by employing an intracavity etalon, the output mirror with different parameters is used for longitudinal mode manipulation in experimental research. By varying the reflectivity and tilting the output mirror, the longitudinal mode grouping and spectral shifting are observed. The experimental results show that, when the output mirror reflectivity decreases from 95% to 60%, the transmission peak linewidth of the intracavity etalon becomes narrower, and the number of the longitudinal mode selected by each transmission peak decreases from a maximum of 7 to a minimum of 1. When output mirror is tilted by +0.03 deg and −0.03 deg, the longitudinal mode wavelengths redshift and blueshift by 0.02 nm. The experimental results are in good agreement with the theory.
A bidirectional high-speed chaotic optical communication scheme with physical layer encryption is proposed and studied theoretically. The external cavity optical feedback method is analyzed. An erbium-doped fiber amplifier is used to represent the all-optical delay feedback loop of the traditional external cavity; it can overcome the shortcomings of the traditional method such as lower precision and high equipment volume requirements. The bidirectional communication scheme is discussed; it sets the encryption device at the transmitter, uses the correlation between the two encryption signals to decrypt, and cancels the decryption device at the receiver, which not only simplifies the experimental equipment but also solves the problem that the receiver cannot decrypt synchronously due to the channel damage in remote communication. Further, it is easily applied in production and life. Finally, the simulation results show that the bit error rate is <10 − 5, and the bidirectional transmission of 10-Gb / s information over an 85-km single-mode fiber is successfully realized.
We present an intensity-balanced dual-frequency laser (DFL) based on an Nd: GdVO4 microchip crystal. The intensity balance ratio tuning mechanism of the DFL, which is governed by the heat sink temperature Tc of the laser crystal, is experimentally studied. The experimental results indicate that keeping a balanced intensity condition, when the pumping power of the DFL increases, the heat sink temperature Tc of the laser crystal must be lowered to rebalance the DFL signal intensities. The Tc versus pumping power slope is experimentally measured to be −17.95 ° C / W. By fixing the pumping power at 5.6 W, an intensity-balanced microchip DFL with output power up to 103 mW and frequency separation up to 61 GHz is achieved, whose slope efficiency is 9%.
A stable multiwavelength semiconductor amplifier (SOA) fiber laser using a nonlinear fiber loop mirror (NOLM) and a Lyot–Sagnac loop mirror is presented and experimentally demonstrated. The Lyot–Sagnac loop mirror serves as a wavelength selection device, and the wavelength spacing is controlled by the length of polarization-maintained fiber (PMF). The NOLM serves as a power equalizer to achieve power equalization and improve stability. Moreover, the NOLM can also suppress the mode competition effect within homogenous broadening linewidth of SOA. Multiwavelength output with power equality has been achieved at room temperature, with no obvious power fluctuation. The number of lasing lines is 31 within the 10-dB bandwidth, and the wavelength spacing is 0.63 nm. In addition, the average optical signal-to-noise ratio is up to 25.15 dB. Finally, narrower wavelength spacing is obtained by increasing the length of the PMF.
We have proposed and experimentally demonstrated a compact temperature sensor based on cascaded fiber Sagnac interferometer (FSI) and fiber Fabry–Perot interferometer (FFPI) with Vernier effect. The FSI is composed of a certain length of panda polarization-maintaining fiber and a 3-dB four-port coupler, whereas FFPI consists of two collimators and a wave plate. Both are used for temperature sensing, but where FSI is more sensitive to temperature than FFPI, the free spectral ranges of the two interferometers differ by 0.12 nm. The experimental results show that the temperature sensitivity is increased from −1.7 nm / ° C (single FSI) and 0.008 nm/°C (single FPI) to 10.28 nm/°C (cascade configuration), which is basically consistent with the theoretical analysis (10.82 nm/°C).
KEYWORDS: Orthogonal frequency division multiplexing, Digital signal processing, Computer security, Single mode fibers, Passive optical networks, Chaos, Quadrature amplitude modulation, Legal, Receivers, Complex systems
To effectively resist malicious eavesdropping and performance deterioration, a novel chaos-based secure transmission scheme is proposed to enhance the physical layer security and reduce peak-to-average power ratio (PAPR) in orthogonal frequency division multiplexing passive optical network (OFDM-PON). By the randomly extracting operation of common CAZAC values, the specially-designed constant amplitude zero autocorrelation (CAZAC) is created for system encryption and PAPR reduction enhancing the transmission security. This method is verified in ~10-Gb/s encrypted OFDM-PON with 20-km fiber transmission. Results show that, compared to common OFDM-PON, our scheme achieves ~3-dB PAPR reduction and ~1-dB receiver sensitivity improvement.
The intensity balance ratio (IBR) tuning mechanism of Nd:GdVO4 monolithic microchip dual-frequency laser (DFL) is presented. The intensity balanced DFL signals are obtained by precisely controlling the heat sink temperature of the Nd:GdVO4 crystal. In experiments, the DFL signal with frequency separation at 64 GHz and IBR above 0.99 is realized with the temperature at 47.6 °C. The other balanced intensity distribution can be reached at -0.9 °C before mode hopping. Moreover, utilizing the fluorescence spectrum and the intensity balance points of Nd:GdVO4 DFL, we obtain the temperature difference between internal and external of Nd:GdVO4 crystal ΔT = 24.0 °C.
In practical multi-granularity WDM optical networks, optical signals will be degraded due to impairments mainly
introduced by a number of multi-granularity optical cross-connects (MG-OXC) and fiber links. Even worse,
transmission impairments will make the bit-error rate to be unacceptable. We investigate the impact of transmission
impairments on optical signal quality in multi-granularity WDM optical networks. A novel dynamic impairment-aware
RWA algorithm is proposed based on the presented transmission impairments model. We also evaluate the proposed
algorithm in the serial cascaded MG-OXCs network and the interconnecting MG-OXCs network by simulations.
Multi-granularity optical cross-connects (MG-OXC) is proposed as a promising technique to reduce the cost of the optical nodes in the wavelength division multiplexing (WDM) optical networks. In this paper, we use the on-line Maximize the Number of Waveband Route (MNWR) algorithm to evaluate the performance and optimize the design of multi-granularity optical WDM networks based on two different MG-OXCs: the serial MG-OXCs and the interconnecting MG-OXCs. The numerical results show that our optimal design can significantly reduce the network complexity and the blocking probability.
In this paper, a short polarization-maintaining Er:Yb co-doped fiber laser is experimented. A pair of FBGs are
written in the Er:Yb co-doped sensitive fiber using UV beams. A 976nm pumping laser diode is used, and output
wavelength is selected by two FBGs. The PM Er:Yb co-doped fiber is used to main the orthogonal polarizations SM
lasing stability. The SM operation in each wavelength has been verified. On the basis of previous short cavity fiber,
a simple DBR dual wavelength fiber laser array has been designed and experimented. Two sections of short Er:Yb
co-doped fiber cavities are pumped by a 976nm LD simultaneously. The pump laser is splitted to pump each Er:Yb
co-doped fiber. It used a WDM coupler at 1550nm to connect the output port of two DBR fiber laser, an isolator is
spliced to the common arm of the WDM and used as the output port. The dual wavelength spacing is 0.31nm. The
output power reaches 6mW with the optical signal to noise ratio of greater than 30dB. A 12.5Gb/s codes rate is used
in the fiber laser transmission experiment. A nice optical eye diagram is recieved after long distance single-mode
communications fiber transmission.
In this paper, a tunable single-frequency fiber laser is designed. For narrow linewidth and single frequency
operation, a length of 2.75m unpumped EDF as a saturable absorber is used. The FBG combined with the unpumped
EDF provides narrow frequency selection. Counter propagating beams in the unpumped EDF form a standing wave
that results in periodic spatial hole burning. This creates a narrower bandwidth absorption grating than the FBG. The
output laser wavelength can be changed from 1530nm to 1570nm by the FBG. The 3dB spectrum width of output
laser is 0.08nm and the side mode suppression ratio is 55dB. The maximum output power exceeds 12mW, and the
stability is less than ±0.005dB. A nice single-frequency laser is observed. From the relationship of the pump power
and output power, it is obvious that the optical bistability switchable phenomena is showed in output characteristics.
The bistability switchable phenomena is caused by the saturable absorber in the ring cavity. A 10Gb/s codes rate is
used in the fiber laser transmission experiment. The high speed optical signal is transmitted in long distance without
regeneration. The eye diagrams of optical transmission are measured, the performance of long haul transmission
with high speed modulation is perfect.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.