High-power laser plays an important role in many fields, such as directed energy weapon, optoelectronic contermeasures, inertial confinement fusion, industrial processing and scientific research. The uniform nearfield and wavefront are the important part of the beam quality for high power lasers, which is conducive to maintaining the high spatial beam quality in propagation. We demonstrate experimentally that the spatial intensity and wavefront distribution at the output is well compensated simultaneously in the complex high-power solid-state laser system by using the small-aperture spatial light modulator (SLM) and deformable mirror (DM) in the front stage. The experimental setup is a hundred-Joule-level Nd:glass laser system operating at three wavelengths at 1053 nm (1ω), 527 nm (2ω) and 351 nm (3ω) with 3 ns pulse duration with the final output beam aperture of 60 mm. While the clear arperture of the electrically addressable SLM is less than 20 mm and the effective diameter of the 52-actuators DM is about 15 mm. In the beam shaping system, the key point is that the two front-stage beam shaping devices needs to precompensate the gain nonuniform and wavefront distortion of the laser system. The details of the iterative algorithm for improving the beam quality and the strategy of achiving high beam quality on spatial intensity and wavefront simultaneously are presented. Experimental results show that the output wavefront RMS value is 0.06, and simultaneously the output near-field modulation is 1.38:1 and the fluence contrast is 10.5% at 3 ns at 1053nm with 40-Joule-level energy.
High-power laser plays an important role in many fields, such as directed energy weapon, optoelectronic contermeasures, inertial confinement fusion, industrial processing and scientific research. The uniform nearfield is the important part of the beam quality for high power lasers, which is conducive to maintaining the high spatial beam quality in propagation. We demonstrate experimentally that the spatial intensity distribution at the output is well compensated in the complex high-power solid-state laser system by using the small-aperture spatial light modulator (SLM) in the front stage. The experimental setup is a hundred-Joule-level Nd:glass laser system operating at three wavelengths at 1053 nm (1ω), 527 nm (2ω) and 351 nm (3ω) with 3 ns pulse duration with the final output beam aperture of 60 mm. While the clear arperture of the electrically addressable SLM is less than 20 mm. In the beam shaping system, the key point is that the front-stage SLM needs to precompensate the gain nonuniform of the laser system. Liquid crystal SLM is an effective active beam shaping device through adjusting each pixel transmittance to improve the spatial beam quality of the output laser, which can also be used as a binary optical element (BOE) with each pixel transmittance 0 or 1 to realize spatial beam shaping for high-power lasers. We present and demonstrate an efficient shaping method of the SLM used as BOE based on diffraction principle. The method can be used to control the output nearfield actively by compensating the spatial nonuniformity of transmission and amplification in the high power laser system. Results show the output nearfield beam quality improves significantly after shaping by using this method with the fluence contrast changing from 22% to 11.3% within only 2 shots in the single-shot operation laser.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.