Dr. Zhiqiang Shen Profile

Dr. Zhiqiang Shen

at Harbin Institute of Technology

SPIE Involvement:

Author

Publications (2)

Proceedings Article | 12 March 2021 Paper

Microwave signal generation based on the optoelectronic oscillator with a dual-long-loop configuration

Zhiqiang Shen, Yuan Zhao

Proceedings Volume 11763, 117630S (2021) https://doi.org/10.1117/12.2586045

Read Abstract +

Proceedings Article | 10 May 2019 Paper

Ultrafast microwave frequency measurement based on electro-optic tunable Fabry-Perot etalon

Zhiqiang Shen, Chenfei Jin, Ce Guan, Qunsong He, Yuan Zhao

Proceedings Volume 11068, 1106829 (2019) https://doi.org/10.1117/12.2524693

KEYWORDS: Microwave photonics

Read Abstract +

In modern radar systems and electronic warfare systems, instantaneous microwave frequency measurement (IFM) is widely used for detecting and roughly classifying unknown signals. However, conventional electrical approaches realizing IFM have hit the bottleneck of limitation in measurement range due to the limited bandwidth of the electronic components. Photonics-based approaches for microwave spectrum analysis are considered to be competitive alternatives because of the advantages such as wide instantaneous bandwidth, low loss and immunity to electromagnetic interference. In the past decades, a few methods of photonic approaches have been proposed. A tunable fiber Fabry-Perot interferometer (FFP)¹ and a fiber Bragg grating² used as an optical scanning receiver were reported, but the response time is long due to the piezoelectric ceramics (PZT) or electric heating driven systems, the scanning speed is only 200 Hz 2. IFM based on frequency-amplitude mapping technique was previously demonstrated.^{3, 4} However, the measurement range is limited to about 20 GHz and the accuracy varies in the whole range. In recent years, frequency measurement based on stimulated Brillouin scattering (SBS) with high resolution was reported,^{5, 6} but the existence of a scanning microwave signal source made the system complex and the response time is depended on the sweeping speed of the local oscillator, which is of the order of milliseconds. In Ref. 7, a system integrating SBS and a frequency shifting recirculating delay line (FS-RDL) was demonstrated. The sweeping time is about hundreds of microseconds, but there is a trade-off between sweeping time and measurement range. Measurement period of 5 s in 20 GHz range has been realized by channelized radio frequency measurement scheme.⁸ However, the implementation of an analog-to-digital converter with bandwidth of 2 GHz made the system complex and costly.

In this work, a novel approach of ultrafast frequency measurement based on electro-optic Fabry-Perot (EOFP) scanning receiver is proposed for the first time. In comparison with other frequency scanning measurement systems, which use methods such as mechanical tuning, electric heating, scanning microwave signal, FS-RDL, etc., our double-EOFP system can measure signals with frequency under 54 GHz in 2 s, which is the fastest scanning rate as far as we know.

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years