In our work, a rotor-stator axial gap non-contact real-time measurement system based on SWI with an auxiliary interferometer for nonlinearity correction is established. The measurement speed is 1kHz and the principle is given. The data of 6-10mm distance is collected, and the distance of each position is calculated by windowed FFT and Hilbert transform respectively. The simulation results indicate that the measurement error of Hilbert algorithm is on the order of a fraction of nanometers, while that of FFT is micrometer level. However, FFT takes 36μs in one measurement which is three times faster than Hilbert algorithm. Both of the two meet the precision requirement of axial gap measurement, it helps us to choose the more appropriate algorithm according to the actual situation.
Laser auto-collimation technology is an important method of precision micro-angle measurement. It has the advantages of high measurement accuracy and simple optical structure. However, the position-sensitive detector (PSD) has nonlinearity, and the uniformity of laser spot is affected by the working distance of the auto-collimation system, which seriously affects the accuracy of angle measurement based on laser auto-collimation technology. To improve the accuracy of laser auto-collimation technology in long-distance angle measurement, PSD is calibrated by linear interpolation to solve the error caused by its nonlinearity. In addition, due to the non-uniformity of the light spot, the PSD zero point is not collinear at different distances, and the measurement error can be corrected by a laser interferometer. Experimental results showed that the interpolation calibration method effectively improved the angle measurement accuracy of PSD. After the zero deviation was corrected, when the PSD moved within 5m, the maximum standard deviation (SD) of the pitch error was 0.12 ", and the SD of the yaw error was 0.09 ". The method proposed in this paper can achieve high precision angle measurement based on PSD at long working distances.
Rotor-stator axial gap is a key design parameter that directly affects the efficiency and safety of large rotating machines. With optimum axial clearance value determined, the rotating machine can work with the highest efficiency. To realize active clearance control (ACC) of rotating machinery, high-precision non-contact online measurement of the axial gap must be carried out. However, traditional measurement methods are challenged by the extreme working environment, such as extreme temperature, high rotating speed, and narrow space conditions; no mature measurement method was reported to realize the high accuracy, non-contact, and online performance required by the axial gap measurement. In this paper, a rotor-stator axial gap measurement method is proposed based on frequency scanning interferometry, and the mathematical model of axial clearance measurement is established. The weak reflection signal of lens and time delay estimation algorithm is employed to undermine the impact of probe pigtail length drift caused by the temperature change under extreme conditions. The axial gap measurement prototype based on sweep frequency ranging was developed, and the measurement and system calibration was carried out. The experimental results verify the effectiveness and accuracy of the method. The drift of the system was less than 20μm in 30 minutes with millimeter level pigtail drift, and the measurement accuracy was better than 50μm.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.