Multiphoton microscopy enables imaging deep inside living specimens. High photon flux is required for the nonlinear excitation of fluorescent markers, which confines the excitation to the small volume of the focal spot. This results in intrinsic optical sectioning and enables non-descanned detection of the fluorescence signal. Although tunable spectral detection has been standard in confocal microscopy for many years, it is still common in multiphoton microscopy to manually change the filters in the detection beam path of the microscope to accommodate for different fluorescence markers. We revolutionized the non-descanned detection by implementing a freely tunable spectral detector for four detection channels. This enables the adaptation to new transgenic markers in seconds and separates strongly overlapping spectra without mathematical restoration. Here, we introduce the technological concept and show its application in imaging of biological specimens demonstrating the capability of the spectral detector.
STED microscopy enables confocal imaging of biological samples with a resolution that is not limited by diffraction. It
provides new insights in various fields of biology, such as membrane biology, neurobiology and physiology. Its three
dimensional sectioning ability allows the acquisition of high resolution image stacks. Furthermore, STED microscopy
enables the recording of dynamic processes and live cell images. We present two-color imaging in confocal STED
microscopy with a single STED wavelength. Pulsed and continuous wave lasers in the visible and near infra-red
wavelengths range are used for stimulated emission. The resolution enhancement is demonstrated in comparison to
confocal imaging with biological specimens.
STED microscopy has gained recognition as a method to break the diffraction limit of conventional light microscopy.
Despite being a new technique, STED is already successfully implemented in life science research. The resolution
enhancement is achieved by depleting fluorescent markers via stimulated emission. The performance is significantly
dependent on the laser source and the fluorescence markers. Therefore the use of novel fluorescent markers in
conjunction with the right laser system was the main focus of our research. We present new developments and
applications of STED microscopy, unraveling structural details on scales below 90nm and give an overview of required
specifications for the solid state laser systems.
Modern microscopy in life sciences is ruled by development and exploration of new dyes and stains (probes for histochemical staining, quantum dots, fluorescent proteins etc.) on one side, and technological improvements and innovations for fluorescence microscopy-especially high resolution and optical sectioning microscopy-on the other side. Concerning the technical innovations, several ingenious inventions have been made available for confocal microscopy. First, the acousto optical tunable filter, which allows switching and dimming of laser lines. Second the spectral detector, employing mirror sliders in front of the detectors which allow continuous tuning of the spectral emission band detected by the sensor. Third, the most challenging task: a substitute to the classical beam splitter-the device which is restricting fluorescence microscopy most. This was solved by introduction of the acousto optical beam splitter. The very last device which is still lacking flexibility is the laser source, operating only at non-equidistant frequencies and requiring a set of quite different laser sources as gas lasers, solid state lasers or diode lasers. A new approach by supercontinuum light sources is presented and discussed, which significantly enhances flexibility and coverage of the excitation spectra of typical, rare and natural fluorochromes.
Confocal microscopy is the method of choice in biological 3D-imaging, however, the axial resolution is limited to ~500 nm. During the last decade it has been successfully demonstrated that the axial resolution can be substantially improved with 4Pi microscopy. We report a 4Pi microscope realized as a fast beam scanning system consisting of a 4Pi-module linked to a state-of-the-art confocal microscope. As a result, the advantages of the confocal system such as scanning, sensitive multicolor detection and imaging speed are combined with the superior resolution of 4Pi microscopy. This novel microscope is eminently suited for biological applications. It is designed both for single-photon and for two-photon picosecond excitation, and also enables joint coherent illumination and detection, i.e. 4Pi type C. The superior PSF and OTF of the system enable 80 nm axial resolution in cells mounted in aqueous media. We present the optical design of the system and demonstrate an up to 7-fold improved optical sectioning in live cells.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.