GroundBIRD is a ground-based cosmic microwave background (CMB) experiment for observing the polarization pattern imprinted on large angular scales (ℓ > 6 ) from the Teide Observatory in Tenerife, Spain. Our primary scientific objective is a precise measurement of the optical depth τ (σ(τ ) ∼ 0.01) to the reionization epoch of the Universe to cross-check systematic effects in the measurements made by previous experiments. GroundBIRD observes a wide sky area in the Northern Hemisphere (∼ 40% of the full sky) while continuously rotating the telescope at a high speed of up to 20 rotations per minute (rpm) to overcome the fluctuations of atmospheric radiation. We have adopted the NbTiN/Al hybrid microwave kinetic inductance detectors (MKIDs) as focal plane detectors. We observe two frequency bands centered at 145 GHz and 220 GHz. The 145 GHz band picks up the peak frequency of the CMB spectrum. The 220 GHz band helps accurate removal of the contamination of thermal emission from the Galactic interstellar dust. The MKID arrays (138 MKIDs for 145GHz and 23 MKIDs for 220GHz) were designed and optimized so as to minimize the contamination of the two-level-system noise and maximize the sensitivity. The MKID arrays were successfully installed in May 2023 after the performance verification tests were performed at a laboratory. GroundBIRD has been upgraded to use the full MKID arrays, and scientific observations are now underway. The telescope is automated, so that all observations are performed remotely. Initial validations, including polarization response tests and observations of Jupiter and the moon, have been completed successfully. We are now running scientific observations.
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 μK-arcmin with a typical angular resolution of 0.5° at 100 GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes (SATs) and one large-aperture telescope (LAT), which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. The SATs are optimized for a primordial gravitational wave signal in a parity odd polarization power spectrum at a large angular scale. We will present the latest status of the SAT development.
LiteBIRD has been selected as JAXA’s strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) B-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of -56 dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34–161 GHz), one of LiteBIRD’s onboard telescopes. It has a wide field-of-view (18° x 9°) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90◦ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at 5 K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34 GHz to 448 GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium-and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89{224 GHz) and the High-Frequency Telescope (166{448 GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5 K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100 mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
High angular resolution astronomical observation in terahertz frequencies better than one milli-arcsecond will open a new field of terahertz astronomy. We propose terahertz intensity interferometry for aperture synthesis imaging. Fast photon detectors in terahertz frequencies are the key technology. We work on low leakage SIS photon detectors, which will be capable to detect every photon arrival. Photo response of SIS photon detectors is presented and its application to terahertz intensity interferometry is discussed together with developments of readout electronics and cryogenics.
GroundBIRD is a millimeter-wave telescope to observe the polarization patterns of the cosmic microwave background (CMB). The target science topics are primordial gravitational waves from cosmic inflation and reionization optical depth. Therefore, this telescope is designed to achieve the highest sensitivity at large angular scales, ℓ = 6 - 300. For wide sky observations (~40% full-sky), scanning at a high rotation speed (120°/s) is important to remove atmospheric fluctuations. Microwave kinetic inductance detector (MKID) is utilized with the fast GroundBIRD rotation since its good time response. We have started the commissioning run at the Teide Observatory in the Canary Islands. We report the performance of the telescope, receiver, and data acquisition system, including cooling achievements, observations of astronomical objects, and observations taken during several days ahead of our main survey observations.
LiteBIRD is a candidate for JAXA’s strategic large mission to observe the cosmic microwave background (CMB) polarization over the full sky at large angular scales. It is planned to be launched in the 2020s with an H3 launch vehicle for three years of observations at a Sun-Earth Lagrangian point (L2). The concept design has been studied by researchers from Japan, U.S., Canada and Europe during the ISAS Phase-A1. Large scale measurements of the CMB B-mode polarization are known as the best probe to detect primordial gravitational waves. The goal of LiteBIRD is to measure the tensor-to-scalar ratio (r) with precision of r < 0:001. A 3-year full sky survey will be carried out with a low frequency (34 - 161 GHz) telescope (LFT) and a high frequency (89 - 448 GHz) telescope (HFT), which achieve a sensitivity of 2.5 μK-arcmin with an angular resolution 30 arcminutes around 100 GHz. The concept design of LiteBIRD system, payload module (PLM), cryo-structure, LFT and verification plan is described in this paper.
The cosmic microwave background (CMB) radiation is an afterglow of the Big Bang. It contains the crucial keys to understand the beginning of the universe. In particular, the odd-parity patterns of CMB polarization, B-modes, at more than degree-scale, are the best probe to detect primordial gravitational waves at the cosmic inflation. The GroundBIRD experiment aims to detect this large angular scale patterns from the ground. The experiment employs novel techniques; a high-speed rotational scanning system (20 revolution-per-minutes) with cold optics below 4K, and microwave kinetic inductance detectors (MKIDs) as the focal plane detectors. The fast scanning modulation is a crucial characteristic in our observation strategy to mitigate effects of the atmospheric fluctuation. The telescope rotates and scans the sky along the azimuth at the elevation angle of 60 degrees at Teide observatory in the Canary Islands. It allows us to measure CMB polarization patterns at a wide multipole range, 6 < \ell < 300, i.e.
aiming to catch the reionization bump. We have developed a telescope mount with 3-axis rotation mechanism (azimuth, elevation, and boresight). We are evaluating the vibration at the focal plane position with rotating the telescope mount. The focal plane consists of seven hexagonal corrugated horn coupled MKIDs array: six hexagon units are for 145 GHz band (55 pixels/unit), and one unit is for 220 GHz band (112 pixels). Each pixel consists of a corrugated horn, a planner OMT, millimeter wave circuits for transmission of dual-polarization signals with the suppression of crosstalk modes, and two MKIDs for each polarization. Magnetic shields are also mounted so as to suppress the external magnetic fields. Trapped magnetic fields inside of the superconducting materials decrease the performance of the MKID. The geomagnetism is the static and large magnetic fields. The telescope motion makes modulation of the geomagnetism as well as the modulation of CMB signals. Therefore, we need careful evaluation associating with the telescope rotation. By using a small evaluation system with modulated magnetic fields, we understand impacts the magnetic shield as well as responses of the MKID for the modulated magnetic field. We
design the shield based on them. In this presentation, we will report an evaluation of detector responses on the high-speed rotating system along the azimuth. We will also show demonstrations of our own readout electronics which is well matching with the rapid scan modulation strategy.
LiteBIRD is a next generation satellite aiming for the detection of the Cosmic Microwave Background (CMB) B-mode polarization imprinted by the primordial gravitational waves generated in the era of the inflationary universe. The science goal of LiteBIRD is to measure the tensor-to-scaler ratio r with a precision of δr < 10-3♦, offering us a crucial test of the major large-single-field slow-roll inflation models. LiteBIRD is planned to conduct an all sky survey at the sun-earth second Lagrange point (L2) with an angular resolution of about 0.5 degrees to cover the multipole moment range of 2 ≤ ℓ ≤ 200. We use focal plane detector arrays consisting of 2276 superconducting detectors to measure the frequency range from 40 to 400 GHz with the sensitivity of
3.2 μK·arcmin. including the ongoing studies.
Polarized patterns in the cosmic microwave background (CMB) radiation contains rich knowledge for early stage of the universe. In particular their odd-parity patterns at large angular scale (> 1°), primordial B-modes, are smoking-gun evidence for the cosmic inflation. The GroundBIRD experiment aims to detect these B-modes with a ground-based apparatus that includes several novel devices: a high-speed rotational scan system, cold optics, and microwave kinetic inductance detectors (MKIDs). We plan to start observations in the Canary Islands in 2017. In this paper, we present the status of the development of our instruments. We established an environment that allows operation of our MKIDs in an optical configuration, in which the MKIDs observe radiations from the outside of the telescope aperture. We have also constructed MKID prototypes, and we are testing them in the optical configuration.
We present the mission design of LiteBIRD, a next generation satellite for the study of B-mode polarization and inflation from cosmic microwave background radiation (CMB) detection. The science goal of LiteBIRD is to measure the CMB polarization with the sensitivity of δr = 0:001, and this allows testing the major single-field slow-roll inflation models experimentally. The LiteBIRD instrumental design is purely driven to achieve this goal. At the earlier stage of the mission design, several key instrumental specifications, e.g. observing band, optical system, scan strategy, and orbit, need to be defined in order to process the rest of the detailed design. We have gone through the feasibility studies for these items in order to understand the tradeoffs between the requirements from the science goal and the compatibilities with a satellite bus system. We describe the overview of LiteBIRD and discuss the tradeoffs among the choices of scientific instrumental specifications and strategies. The first round of feasibility studies will be completed by the end of year 2014 to be ready for the mission definition review and the target launch date is in early 2020s.
LiteBIRD [Lite (Light) satellite for the studies of B-mode polarization and Inflation from cosmic background
Radiation Detection] is a small satellite to map the polarization of the cosmic microwave background (CMB)
radiation over the full sky at large angular scales with unprecedented precision. Cosmological inflation, which
is the leading hypothesis to resolve the problems in the Big Bang theory, predicts that primordial gravitational
waves were created during the inflationary era. Measurements of polarization of the CMB radiation are known as
the best probe to detect the primordial gravitational waves. The LiteBIRD working group is authorized by the
Japanese Steering Committee for Space Science (SCSS) and is supported by JAXA. It has more than 50 members
from Japan, USA and Canada. The scientific objective of LiteBIRD is to test all the representative inflation models that satisfy single-field slow-roll conditions and lie in the large-field regime. To this end, the requirement
on the precision of the tensor-to-scalar ratio, r, at LiteBIRD is equal to or less than 0.001. Our baseline design
adopts an array of multi-chroic superconducting polarimeters that are read out with high multiplexing factors in
the frequency domain for a compact focal plane. The required sensitivity of 1.8μKarcmin is achieved with 2000
TES bolometers at 100mK. The cryogenic system is based on the Stirling/JT technology developed for SPICA,
and the continuous ADR system shares the design with future X-ray satellites.
We present a novel spectral imaging method for characterization of exoplanets. This method uses 4 collecting telescopes,
in a pattern similar to TPF-I or Darwin, combined with phase chopping. Focusing on contiguous observing wavelengths
in space, the (u, v) plane can be simultaneously filled by the use of the contiguous observing wavelengths instead of
continuously rotating the baselines. For a target comprising a star and a planet, observations on two baselines are
sufficient to extract an image of the planetary system and a spectrum of the planet. Our simulations show that this new
method allows us to detect an analog Earth around a Sun-like star at 10pc and to acquire its spectrum over the
wavelength range from 8 to 18μm.
We have proposed an original Michelson type bolometric interferometer dedicated to CMB B mode observations
in which a large format detector array is able to mounted on the focal plane since the diameter of the primary
beam do not have to be smaller than the baseline length of the interferometer and is able to be taken as large as
one want. This instrument is named as MuFTPol. The MuFTPol dramatically improves the sensitivity of the
B mode experiments based on Michelson type bolometric interferometer otherwise the primary beam size could
not be larger than 10cm in the CMB B mode experiment targetting the gravity wave origin B mode.
There are two different types of beam combination: Fizeau interferometer and Michelson interferometer.
Pupil plane beam combination is referred as Fizeau interferometer. On the other hand, image plane beam
combination is referred as Michelson interferometer. In general, working principles of Michelson
interferometers are based on double Fourier interferometry. It is possible to acquire two-dimensional
spatial and one-dimensional spectral information of the sky by applying a Fourier transform spectrometer
algorithm and the Van Cittert-Zernike theorem. This imaging scheme is referred to as the double Fourier
interferometry. On the other hand, it is so far thought to be difficult to perform the imaging with a Fizeau
interferometer, because Fizeau interferometers basically don't have a delay line that is equipped with
Michelson interferometers. Here, Matsuo et al.1 presented a new spectral imaging method for Fizeau
interferometers, based on double Fourier interferometry. They noticed that a delay axis in Michelson
interferometers is equal to the axis of a fringe pattern on an image plane in Fizeau interferometers.
Therefore, this new approach can acquire three-dimensional information of the sky using a linear array
detector placed on the image plane. In this paper, we compare the new spectral imaging method for
Fizeau interferometer with the conventional one used for Michelson interferometer and discuss spectral
resolutions and field of views of these imaging methods.
We propose an instrument by applying the aperture synthesis technique to the Martin & Puplett type Fourier Transform Spectrometer in millimeter and sub-millimeter waves. We call this equipment Multi-Fourier Transform interferometer (MuFT). MuFT realizes a wide band imaging, spectroscopy and polarimetry in millimeter and sub-millimeter waves. The direct detectors, eg. bolometer, SIS video detector, can be used as the focal plane detectors. These type of detectors have a great advantage in FIR band since they are free from the quantum limit of the noise which limits the sensitivity of the heterodyne detectors used in the usual interferometers. Further, the direct detectors are able to make a large format array contrary to the usual interferometers in which usage of array detector is practically difficult. Above three characteristics make one be possible to develop high sensitive super broad band FIR interferometer with wide field of view. Fundamentals of the MuFT with results of laboratory experiments and current status of astronomical observations with MuFT are summarized. We did test observation with this system in the winter 2005. We also report concerning the observational result in 2006.
We are developing the super broad band interferometer by applying the
Fourier Transform Spectrometer(FTS) to aperture synthesis system in mm and sub-mm bands. We have constructed a compact system based on the Martin and Puplett type Fourier Transform spectrometer (MP-FT).
We call this equipment Multi-Fourier Transform interferometer (MuFT).
The band width of the system can be extended as large as one wants contrary to the severely limited band width of the usual interferometer due to the speed of the AD converter. The direct detectors, e.g. bolometer, SIS video detector, can be used as the focal plane detectors. This type of detectors have a great advantage in FIR band since they are free from the quantum limit of the noise which limits the sensitivity of the heterodyne detectors used in the usual interferometers. Further, the direct detectors are able to make a large format array contrary to the heterodyne detectors for which construction of a large format array is practically difficult. These three characteristics make one be possible to develop high sensitive super broad band FIR interferometer with wide field of view. In the laboratory experiments, we have succeeded in measuring the spectroscopically resolved 2D image of the source in 150GHz-900GHz band. The future application of this technique to the observations from the space could open new interesting possibilities in FIR astronomy.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.