Dr. Jong Hoon Jang Profile

Dr. Jong Hoon Jang

at SAMSUNG Electronics Co Ltd

SPIE Involvement:

Author

Publications (4)

Proceedings Article | 24 March 2017 Paper

Reticle heating feed-forward control (RHC2) on NXT:1980Di immersion scanner for enhanced on-product overlay

Young Ha Kim, Jonghoon Jang, Byeong Soo Lee, Hyunwoo Hwang, Youngsun Nam, Jeong-Heung Kong, Young Seog Kang, Se-Yeon Jang, Bart Paarhuis, Jeroen van der Wielen, Barry Moest, Joris Jongen, Stefan Weichselbaum, Niek Verbeek, Marco Stavenga, Roelof de Graaf, Richard Droste

Proceedings Volume 10147, 1014717 (2017) https://doi.org/10.1117/12.2259792

KEYWORDS: Reticles, Scanners, Distortion, HVAC controls, Optical alignment, Control systems, Thermal effects, Temperature metrology, Semiconducting wafers, Overlay metrology, Calibration

Read Abstract +

Scanners in High-Volume-Manufacturing conditions will experience a large range of reticles that vary in reticle transmission and reticle diffraction characteristics. Especially under full production loads reticles will heat up due to the exposure light-load and as such experience thermo-mechanical deformations. The resulting reticle pattern distortion can be partially translated in a deteriorated overall system overlay. Due to the geometry of the reticle and exposure fields, these reticle thermal effects are in general barrel-shape distortions that can be well corrected with the available set of lens manipulators. Nevertheless node-over-node the residual overlay errors associated with thermo-mechanical reticle deformation needs further reduction since it contributes to the total onproduct overlay performance. To reduce overlay caused by reticle temperature drift, NXT1980Di includes an active cooling mechanism suppressing the reticle temperature changes during exposure significantly. Even though the reticle temperature excursions are well suppressed, residual intra-wafer overlay drift effect can still be observed. Before exposure of a wafer, reticle deformation is measured during reticle align using in-line alignment / image sensors (TIS or PARIS). This is enabled by adding alignment markers around the circumference of the image field on the reticle. The measured reticle deformations are then fed to the system control network and dynamically corrected for by making use of the available manipulators in the scanner and the projection lens. Wafer-by-wafer reticle distortion measurements are performed to accurately capture the transient dynamics present in reticle heating during normal production lots. A new version of Reticle Heating Feed-forward Control (RHC2) is introduced that uses reticle-heating-induced deformation measurements over time and exposure sequence information to calibrate reticle-deformation-predictionmodels. These models are based on thermo-mechanical models that simulate reticle deformation under various exposure conditions and are applied in-line to the exposures to reduce intra-wafer overlay drift effects.

Proceedings Article | 24 March 2017 Presentation + Paper

Layout independent leveling (LIL) on NXT:1980Di immersion scanners for enhanced productivity

Bram van Hoof, Arjan Holscher, Ralf Gommers, Jeroen Cottaar, Marcel Raas, Samah Khalek, Jan van Kemenade, Maarten Voncken, Roelof de Graaf, Elliot Oti, Stefan Weichselbaum, Richard Droste, ByeongSoo Lee, Chansam Chang, Young Seog Kang, Young Ha Kim, Jeong-Heung Kong, Jong Hoon Jang, YoungSun Nam, Hyunwoo Hwang

Proceedings Volume 10147, 101471A (2017) https://doi.org/10.1117/12.2259794

KEYWORDS: Semiconducting wafers, Sensors, Time metrology, Scanners, Optical alignment, Calibration, Wafer testing, Overlay metrology, Metrology, Computer programming

Read Abstract +

Proceedings Article | 15 March 2016 Paper

Improvement of unbalanced illumination induced telecentricity within the exposure slit

Jonghoon Jang, ByeongSoo Lee, Young Seog Kang, Chansam Chang, Jeong-Heung Kong, Young Ha Kim, Wim Bouman, Roelof de Graaf, Stefan Weichselbaum, Richard Droste, Wim de Boeij, Bart van Bussel, Patrick Neefs, Arij Rijke

Proceedings Volume 9780, 97800X (2016) https://doi.org/10.1117/12.2220588

KEYWORDS: Lithography, Lithographic illumination, Optical alignment, Scanners, Optical lithography, Image enhancement, Reticles, Electronics

Read Abstract +

Proceedings Article | 2 April 2014 Paper

Focus control budget analysis for critical layers of flash devices

Jong Hoon Jang, Tony Park, Kyeong Dong Park, Jong Hyun Hwang, Jin Phil Choi, Young Seog Kang

Proceedings Volume 9050, 90502F (2014) https://doi.org/10.1117/12.2046235

KEYWORDS: Semiconducting wafers, Scanners, Finite element methods, Monochromatic aberrations, Control systems, Error analysis, Code division multiplexing, Critical dimension metrology, Process control, Sensors

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years